Exciting stuff happening this week in the rock mechanics lab. My aluminum plates for the ice rig arrived today so I started marking up the center lines and worked on my design to figure out precisely where we will drill holes for the tie rods.
MEANWHILE Heather, Rachel, and Pratigya have been making great strides in their paleothermometer project!
The idea for the study is that certain organic matter can be used as an indicator of temperature. With time and temperature, particular organics go through known reactions. The reactions can only go one way, so the altered material captures the peak temperature, even after things cools down. During an earthquake, fault rocks are believed to get pretty hot from frictional heating, but the extent of this has not been well constrained. Heather and Pratigya came up with the idea that if they can analyze the thin layer of sedimentary rock in the middle of the fault zone to look for specific altered organic material, this will tell them the temperature range that the fault experienced. For a better description of the project, check out this cool TED-style talk they gave at a Lamont community seminar. Before they can really start analyzing the fault rocks, however, they need to establish good reference values. So they are now taking crushed up sedimentary rock and are systematically heating it to known temperatures and durations. Here the team troubleshoots the new rig and starts developing the experimental protocol.
They heat the crushed up rock rapidly (simulating frictional heating in faults) in the tube below (that they call a "bomb") with that heating coil wrapped around the outside. Although the times, temps, and pressures are considerably less than what, say, large reserves of organic material in the earth experience, the initial stages of the reaction are similar to those that create petroleum. Even though they are working with only a teaspoon or so of material, the smell is simply horrendous. It's like being in the middle of an oil refinery.
They measure the temperature inside the bomb with thermocouples and monitor it with the panel of meters below. The Omega black box underneath is called a data acquisition system (DAQ) and is used to send data to the computer.
Here the undergraduate intern Rachel starts an experiment by turning on the gas while Ted looks on.